|
描述 |
标准 |
MIL-STD-202 |
规范 |
207 |
涵盖范围 |
This test is performed for the purpose of determining the ability of various parts to withstand shock of the same severity as that produced by underwater explosions, collision impacts, near-miss gunfire, blasts caused by air explosions, and field conditions. Exact simulation of some of the severe shock motions experienced in the field is difficult to reproduce; however, parts that successfully complete the test of this method have been found to possess the necessary ruggedness for this use. The test apparatus utilized in this method is the same as that designated as Shock Testing Machine for Lightweight Equipment in MIL-S-901, Shock Tests, HI (High-Impact), Shipboard Machinery, Equipment and Systems, Requirements for. The purpose of this apparatus is to determine the ability of equipment installed aboard naval ships to withstand shock and still continue to perform its operational function. This test method is limited to testing of parts weighing not more than 300 pounds. |
描述 |
Method 207, High Impact Shock |
分类归属 |
59GP |
文档状态 |
有效
|
文档日期 |
2015-04-18 |
审查日期 |
2020-04-16 |
文档类型 |
Military Standard -Test Method Standard |
文档注释 |
It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance;older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases. |
起草机构 |
CC |
编制机构 |
DLA Land and Maritime |
协调级别 |
Full |
陆军管理 |
US Army Communications Electronics Command |
海军管理 |
Space and Naval Warfare Systems Command |
空军管理 |
Air Force Life Cycle Management Center - Electronic Components, Wire and Ca |
国防后勤局管理 |
DLA Land and Maritime |