Teledyne Paradise Datacom 100W S-Band Compact Outdoor GaN SSPA
The Teledyne Paradise Datacom 100W S-Band Compact Outdoor GaN Solid State Power Amplifier (SSPA) is built for extreme environmental conditions and high reliability operation. Along with the robust construction exists the highest power density in the industry. This allows solid state technology to be used in applications that have long been reserved for TWTAs. Weighing 44 lbs. (20 kg) and being only slightly larger than a shoe box.
Frequency Selection
HPAS2100GCXXXXXG “G”: 1.750 to 2.120 GHz
HPAS2100ACXXXXXG “A”: 2.020 to 2.120 GHz
HPAS2100BCXXXXXG “B”: 2.200 to 2.300 GHz
Output Power
Psat: 100 watts
PLinear: 50 watts
Features
Compact size and weight
CE & MIL-461 Compliant
Integrated forced-air cooling system
20 dB RF Gain Adjustment
Extreme Environmental Testing
RF Output Sample Port
Maintenance Free Operation
Universal, Power Factor Corrected Power Supply
Built-in 1:1 Redundancy Control
Built-in Maintenance Switch Controller
True Output Power Detection
L-Band Operation
Teledyne Paradise Datacom GaN amplifiers are available with an integrated L-Band Block Up Converter. L-Band units utilize proprietary zBUC technology. Adding a zBUC converter typically increases the gain by 2-4 dB. Advantages include:
zBUC converter can detect and switch to an extenally supplied reference.
Optional internal high stability (10MHz) reference.
Locks to an externally supplied reference of 10 or 50 MHz.
Accepts a wide range of external reference power (-10 to +5 dBm)
FSK monitor and control signal via the IFL for complete amplifer remote control.
Universal Handheld Controller (RCH-1000)
The Universal Handheld Controller (RCH-1000) is a versatile device used to interface with a variety of Teledyne Paradise Datacom amplifiers, including Compact Outdoor SSPA, or H-Series High Power Outdoor SSPA. Reference specification sheet 211667.
The device is housed in a ruggedized enclosure that is environmentally sealed to IP65 levels. This allows the Universal Handheld Controller (RCH-1000) to be used in most outdoor environments. The rugged construction of the device enclosure provides protection from impact and vibration.
This device allows the operator to adjust the attenuation of the connected unit, and control the mute/unmute selection, as well as monitor the status, conditions and settings of the connected unit via a serial RS-485 connection. Fault conditions and other events are tracked in the controller’s internal log.
Options
Hand Held Controller
Antenna Mounting Kit
Remote Control Panel
L-Band Input
FSK monitor & control via IFL
Phase Combined Systems
Low line voltage operation
Fiber Optic Input
Optional side-mount AC input for SNG installations
Receive Band Reject Filter
Reflected Power Monitor
-55 °C Operation