2mm / cPCI连接器
可与cPCI COTS系统互换
免疫休克和振动微动
高温LCP绝缘子符合NASA除气要求
反向性别至商业2mm产品
键控功能确保正确的交配
K2A110FFDTABH
K2A110FFDTABH
K2A110FMDTBH
K2B095FFD
K2B095FFDTABH
K2B095FMD
K2B110FFD
K2B110FFDTABH
K2B110FMD
史密斯连接器cPCI 2mm连接器系统基于传奇的Hypertac®接触技术,以其抗冲击和振动微动功能而闻名。针对军事标准,cPCI 2mm连接器以坚固耐用的CompactPCI格式提供最高性能,适用于所有关键任务应用,如军用陆地系统,船上和航空航天。
该连接器配置在具有六排的2mm中心线上,该连接器使用0.4mm的Hypertac触点,具有小于8毫欧的接触电阻和1.0A的额定电流。我们优化的接触导线在高速信号应用中提供卓越的性能,这些连接器与标准回流焊接工艺兼容。
cPCI 2mm连接器有键盘和无钥匙配置。模块化的设计,连接器长度可变,可以以五个触点的增量进行更改。
其他好处包括:
Hypertac触点提供高可靠性
标准2mm足迹
防护罩可防止EMI / RFI
Q CI (Quality Conformance Inspections) K2 Series = MIL-DTL-55302 311P Series = NASA GSFC S-311-P-822 | ||||||
3U/6U Form Factor | P1/P4 | P2/P5 | P3 | J1/J4 | J2/J5 | J3 |
Part Number Reference | K2A110FMD | K2B110FMD | K2B095FMD | K2A110FFD | K2B110FFD | K2B095FFD |
Design Criteria | IEC 1076-4 101 | |||||
Contact Gender | Male Pin | Hypertac 0.40mm socket | ||||
Contact Termination | Solder tail 63/37 tin lead plated | Gold or 63/37 tin lead dipped | ||||
Contact Spacing | 2.00mm | |||||
Number of Contacts | 110 signal 22 ground | 95 signal 19 ground | 110 signal 22 ground | 95 signal 19 ground | ||
Contact Current Rating | 1 Amp | |||||
Temperature Range | -55° C to 125° C | |||||
Insulator Material | 30% Glass Filled LCP (meets NASA outgassing specification) | |||||
Flammability Rating | 94 V-O | |||||
Insulation Resistance | > 5000 megohm | |||||
Contact Material | Beryllium copper pin contacts | Beryllium copper Hypertac socket wires and brass body | ||||
Mating Contact Plating | 50µin gold / 50µin nickel min.
| |||||
Max. Allowable Gap Between Mating Connectors | 0.039 inches [1.00mm] | |||||
Suggested PCB Hole Diameter | 0.71±.05 mm after plating | 0.60mm after plating | ||||
Weight | 0.55 oz | 0.53 oz. | 0.38 oz. | 0.38 oz. | 0.45 oz. | 0.31 oz. |
3U/6U Form Factor | P1/P4 | P2/P5 | P3 | J1/J4 | J2/J5 | J3 | |
Part Number Reference | K2A110FMD | K2B110FMD | K2B95FMD | K2A110FFD | K2B110FFD | K2B95FFD | |
LLCR (Low Level Contact Resistance) | 7.20 milliohms average | ||||||
DWV(Dielectric Withstanding Voltage) | 1000 VRMS | ||||||
Contact Life(Mate/Demate) | >4000 Cycles (per mated connector pair) | ||||||
Mating Force | 16.38 LBF average (per mated connector pair) | ||||||
Demating Force | 13.2 LBF average (per mated connector pair) | ||||||
Vibration(Sinusoidal)* | Frequency 10 to 2000 HZ at 15G (MIL-DTL-55302) (NASA GSFCS311-P-822) | ||||||
Vibration(Random)** | Flight chassis unit level vibration (NASA Goddard GEVS SE Rev A) | ||||||
Mechanical Shock* | 100 G peak value (NASA GSFC S311-P-822) | ||||||
* Testing was performed to determine if fretting occurs due to mechanical motion and to evaluate the integrity of the Hypertac contact system under severe shock. To validate the test, event detection was performed at 10 nanoseconds. There were no events recorded. ** Testing was performed using a 6U Flight Chassis to determine if fretting occurs due to mechanical motion and to evaluate the integrity of the test samples relative to severe mechanical environment. To validate the test, event detection was performed at 50 nanoseconds. There were no events recorded. | |||||||
All specifications are subject to change without notice |