|
描述 |
标准 |
MIL-PRF-64266 |
规范 |
25 |
涵盖范围 |
The performance requirements specified herein cover a connector plug that is affixed to the connector receptacle on the front edge of a circuit card or printed circuit board (PCB). Mating of the connector plug to the connector receptacle is accomplished after the PCB is inserted into the backplane or rack. Once the connector receptacle, positioned on the front edge of the PCB, is correctly inserted into the backplane or rack, the connector halves are mated then tightened together using the feature of a jackscrew. Cable entry resistant features for the single fiber cables include ability to restrict movement, position, and twist; however, there are no features to capture the cabling or to prevent the penetration of various environments. |
描述 |
Connectors, Fiber Optic, Rectangular, Plug, Card Front Edge Style, Multiple Removable Termini, Single Fiber Cables, Jackscrew Locking, No Strength Member Capture at Cable Entry Interface, Nonenvironment Resisting, Temperature Ranges 1 and 2 |
分类归属 |
6060 |
合格产品清单 |
QPL-64266 NOT 1 |
文档状态 |
有效
|
文档日期 |
2014-03-20 |
审查日期 |
2019-03-19 |
文档类型 |
Performance Specification |
文档注释 |
It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance;older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases. |
起草机构 |
CC |
编制机构 |
DLA Land and Maritime |
协调级别 |
Full |
陆军管理 |
US Army Communications Electronics Command |
海军管理 |
Naval Sea Systems Command (Ship Systems) |
空军管理 |
Air Force Life Cycle Management Center - Electronic Components, Wire and Ca |
国防后勤局管理 |
DLA Land and Maritime |