|
描述 |
标准 |
MIL-PRF-29504 |
规范 |
21 |
涵盖范围 |
The Measurement Quality Jumper (MQJ) is a fiber optic test jumper or cable that conforms to the low loss optical requirements. The MQJ is used with test equipment including the performance of optical loss measurements using an optical source and power meter and including Optical Time Domain Reflectometer (OTDR) measurements. The MQJ consists of a single fiber cable with a connector at one end which mates to the test equipment (such as an optical source and power meter) and a connector (test terminus) at the other end which mates to the link/segment under test. For mating to a link/segment with a MIL-PRF-64266 multiple termini connector, a test terminus adapter is used to interface with the multiple termini connector plug or the connector receptacle under test. The test terminus adapter contains the insert cavity configuration to mate with and lock a test terminus in place. This specification sheet specifies the test terminus. The test terminus adapter is specified under MIL-PRF-64266/32 and MIL-PRF-64266/33. |
描述 |
Test Terminus, Fiber Optic, Keyed, Removable, use in Optical Loss and Optical Continuity Testing, Rear Insert/Rear Release through a Test Terminus Adapter, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors) |
分类归属 |
6060 |
合格产品清单 |
QPL-29504-19 NOT 1 |
文档状态 |
有效
|
文档日期 |
2014-02-03 |
审查日期 |
2019-02-02 |
文档类型 |
Performance Specification |
文档注释 |
It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance;older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases. |
起草机构 |
CC |
编制机构 |
DLA Land and Maritime |
协调级别 |
Full |
陆军管理 |
US Army Communications Electronics Command |
海军管理 |
Naval Sea Systems Command (Ship Systems) |
空军管理 |
Air Force Life Cycle Management Center - Electronic Components, Wire and Ca |
国防后勤局管理 |
DLA Land and Maritime |