|
描述 |
| 标准 |
A-A-59876 |
| 涵盖范围 |
This document describes performance requirements for a Torque Wrench Calibrator, and associated dead-weight calibration equipment. The Torque Wrench Calibrator consists of two separate “stations”. The two stations of the Torque Wrench Calibrator must be capable of being operated at the same time. These systems are intended for use by civilian and military personnel to perform calibration of torque setting and indicating instruments, force gages, dynamometers, and cable testers. |
| 描述 |
Calibrator, Torque Wrench 5 in-Lbs - 2000 ft-Lbs |
| 分类归属 |
6635 |
| 文档状态 |
有效
|
| 文档日期 |
2010-11-30 |
| 审查日期 |
2015-11-29 |
| 文档类型 |
Commercial Item Description (CID) |
| 文档注释 |
It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance;older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases. |
| 起草机构 |
GL |
| 编制机构 |
Air Force Sustainment Center - Warner Robins |
| 协调级别 |
Limited |
| 空军管理 |
Air Force Sustainment Center - Warner Robins |
| 其他国防部 |
Prepared by DoD activity |
