|
描述 |
| 标准 |
MIL-PRF-12934 |
| 涵盖范围 |
This specification covers the general requirements for precision, wirewound, variable resistors whose electrical output (in terms of percent of applied voltage) are linear or nonlinear with respects to the angular position of the shaft. This specification includes requirements for linear and nonlinear, single turn and multiturn, single-section (cup) and multisection variable resistors. These resistors are capable of full-load operation at maximum ambient temperatures of 70 degrees C and 85 degrees C and are suitable for continuous operation, when properly derated, to maximum temperatures of 125 degrees C and 150 degrees C (see 3.1, 6.2, and figure 10). This specification includes requirements for category I, category II, and category III precision resistors as described herein (see 3.2). |
| 描述 |
Resistor, Variable, Wire-wound, Precision General Specification for |
| 分类归属 |
5905 |
| 合格产品清单 |
QPL-12934-58 |
| 文档状态 |
有效
|
| 文档日期 |
2014-04-28 |
| 审查日期 |
2019-04-27 |
| 文档类型 |
Performance Specification |
| 文档注释 |
It is recommended that you use Adobe Reader v7.0 or higher for optimal download performance;older versions should continue to work, but downloading large files may appear to take longer, so please be patient in those cases. |
| 起草机构 |
CC |
| 编制机构 |
DLA Land and Maritime |
| 协调级别 |
Full |
| 陆军管理 |
US Army Communications Electronics Command |
| 海军管理 |
Space and Naval Warfare Systems Command |
| 空军管理 |
Air Force Life Cycle Management Center - Electronic Components, Wire and Ca |
| 国防后勤局管理 |
DLA Land and Maritime |
